Bike Parking Stand – 3 Bicycle

//Bike Parking Stand – 3 Bicycle

Bike Parking Stand – 3 Bicycle


SKU: MR-PS3 Category:


Bicycle Stands for 3 Bikes

These bicycle stands are wonderful if your purpose is to keep bikes neat and tidy. Mainly used when security is not a major issue. These are often put in garages, in commercial or industrial premises. Many bicycle retailers use our bicycle stands for shop displays.

A Bicycle Stand for 3 bikes is 85 cm in length. Each stand is spaced 37 cm apart. Holes are provided to enable you to anchor the bicycle stands to the ground if you wish.

Importantly our bicycle stands are made to last. They are made from 12mm steel and will provide you with years of service. As they are fully welded there are no points of weakness. And finally, even if something should to go wrong they are covered by a 10 year replacement warranty.

Our bicycle stands are designed to hold the majority of bicycles commonly used. The uprights of the stand are 6 cm apart. This means they hold any bicycle tire up to 2.25 inches. If you are not familiar with bicycle tires, this means all bicycles except some specialist downhill tires can be held.

Installing the bicycle stand is a simple matter of deciding whether you wish to install them straight or offset to one side as in the attached picture. Installing them at an offset angle can be convenient, but our suggestion is to install them at 90 degrees in most circumstances as it maximises the space which each rider has to access their bicycle.

Surface Finish

This product is available in either hot dipped galvanised or powder coated black.


Freight for your purchase is free to any of the major metropolitan areas of Australia. The main areas where freight may be a problem is WA (except Perth), NT and some parts of outback SA, QLD and NSW. We can ship to more remote locations but there is likely to be a freight charge. If in doubt please contact us.